Flange/Chorus Pedal with Filter Effects, Rate, Flanger and Chorus Control Knobs, and Heavy-duty Construction
Generate slithering "Axis Bold as Love" textures. Use Filter Matrix mode to manually flange your sound or select a flange point allowing musically frozen tonalities. This is the only pedal where lush Stereo Flange and Stereo Chorus work together seamlessly for the richest modulations that undulate and flow over any stage or recording. Colorful and seductive in stereo.
Plug your guitar into the INPUT jack and run a cable from the Main Output to your amplifier. If you want to produce lush Stereo flanges run a second cable from the Stereo Output to a second amplifier. There are three basic controls on the STEREO ELECTRIC MISTRESS.
Rate Knob:
This knob controls the speed or rate of the LFO signal that modulates the flanger. It also controls the rate of the Chorus effect. As you turn the Rate knob up the rate will increase. When the Rate knob is turned down between fully counter-clockwise and the 10 o’clock position, the Stereo Electric Mistress will enter Filter Matrix mode. In Filter Matrix mode the LFO signal is disconnected from the Flanger and Chorus so that you can manually modulate the Flanger/Chorus by turning the Rate knob. Keep the Rate knob below 10 o’clock to keep it in Filter Matrix mode.
Flanger Depth Knob:
Controls the amount of Flange that is mixed with the direct signal. The more you turn the knob clockwise, the more pronounced the flanger effect.
Chorus Depth Knob:
Controls the amount of the sweet chorus sound. The more you turn the knob clockwise, the more pronounced the chorus effect.
Hint:
The Flanger and Chorus effect can be used together. While both produce rich sweeping textures on their own, together they can produce dramatically different and warm sonic textures that are not available when one effect is used alone.
STATUS LED:
This LED indicates the current state of the unit. When the LED is lit up, the box is in EFFECT mode. When the LED is off, the box is in BYPASS mode. Pressing the Footswitch will toggle
INPUT Jack:
This 1⁄4” jack is the audio input to the Stereo Electric Mistress. The input impedance presented at the Input Jack is 2 MΩ.
MAIN OUT Jack:
This 1⁄4” jack is the main effect output jack. Use this jack when connected the Stereo Electric Mistress in mono. The output impedance at this jack is 820 Ω.
STEREO OUT Jack:
This 1⁄4” jack is the stereo effect output jack. Connect this jack to your second amp or second mixer channel when connecting the Stereo Electric Mistress in stereo. The output impedance at this jack is 820 Ω.
9V Power Jack:
Connect the output plug from the AC Adapter that was supplied with your Stereo Electric Mistress to this jack, located at the top of the unit. The Stereo Electric Mistress accepts Boss style AC Adapters.
FLANGER Effect:
The flanging effect can be thought of as a pitch slowly sweeping between high and low limits superimposed on the guitar signal. The RATE control allows you to change the speed at which the sweep occurs. With the RATE control fully counter-clockwise, you enter the Filter Matrix mode, which extends to the 10’o’clock position of the knob. Turning the dial clockwise increases the rate to the point where the frequency of the input signal appears to be shifted in a vibrato-like fashion. The Chorus effect follows the same principal but produces a lush chorus where the rate control is applied to the Chorus and Flanger share identically.
FILTER MATRIX Mode:
The STEREO ELECTRIC MISTRESS has been set at the factory for maximum color capacity in the FLANGER mode. One of the unique settings that was inherited from the legendary DELUXE ELECTRIC MISTRESS is the Filter Matrix mode. The harmonic makeup of the flange remains while no frequency modulation is applied. Different tonalities can be obtained when the RATE knob is set between a totally off position to around 10 o’clock position.
Quick Specs:
- Truly independent stereo outputs
- Individual flanger
- Individual chorus
- Chorus and flanger may be used together
- Filter matrix mode available allowing you to manually sweep the flanger
- Tough and compact die-cast chassis
- 96DC-200BI power supply included
- Dimensions in inches: 4.0 (w) x 4.75 (l) x 2.25 (h)
- Dimensions in mm: 102 (w) x 121 (l) x 89 (h)
*Usado:
- Este artículo se ha usado anteriormente.
- Este artículo puede tener algunos signos pequeños de desgaste cosmético.
- Este artículo está en pleno funcionamiento y funciona según su diseño de fábrica previsto.
- Este artículo puede ser un modelo de demostración en nuestra tienda.
- Para obtener más detalles acerca de este artículo usado y una descripción de cualquier imperfección, por favor llamar al +52 1 812 210 3518